Skip to content
Geomatic Engineering News

Geomatic Engineering News

Geomatic Engineering and Professional Land Surverying News

Tag: bathroom design

Posted on April 2, 2021

The Engineering Behind Bathroom Design

bathroom engineering design

 

Bathrooms or toilets are essential spaces in the design of a house. You must take into account the correct bathroom design in your home project. The bathroom is a space where daily activities take place, and if it is well designed, it can be a delightful area. On many occasions, we consider them as the last space within our distribution of interior spaces.

For the design of bathrooms, we must always take into account that you must carefully study their location within the house:

  • – The toilets are spaces with humidity and odors, that is why we must take into account their correct orientation and ventilation
  • – It is crucial to keep the hydraulic and sanitary installations as close as possible so that areas with humidity are easily located
  • – The spaces considered humid are the bathroom, the kitchen, the laundry room, and the service yard.

On many occasions, we seek that the bedrooms or the living room and dining room have the best view in our design, and we insist on it, and it is okay. What causes that many times the bathroom or bathrooms are left in corners where there is no ventilation or natural lighting. Sometimes the bathroom provides service for the living room and dining room without ventilation or worse, with the ventilation to where we will receive our guests.

It is correct that we place a bathroom near our visitor areas, the living room, the study, and the dining room, but that it is illuminated and above all that it is ventilated towards a patio or a garden that allows it always to be clean of odors.

Furniture within your bathroom design

A basic bathroom design can include a sink, toilet, and, of course, a shower. You could augment your bathroom furniture by adding a nice bathtub, bidet, urinal, cabinets, or even a medicine cabinet if you have the free space to do so.

It is essential to consider that the surface of a bathroom depends on the furniture that you will place. It is recommended that the dimensions of these spaces be attached to the minimum so that the use of each piece of furniture is appropriate.

Sink

Depending on the number of people who will use the toilet, it is the number of sinks that will be placed. In the main bathroom, usually for a couple, you could consider the placement of 2 sinks on a single support plate. When the house has one shared bathroom for two rooms, the installation of one sink is sufficient.

In shared bathrooms, a good idea to optimize their operation is to place the toilet and shower with separate doors, leaving only the sink freely accessible. In this way, two or more people can occupy the same bathroom simultaneously.

In the case of toilets, half baths, or guest baths, it is advisable to place only one sink. We must take into account that if this toilet is a very small space, our sink must also be small.

Ideally, they should be ceramic sinks since they are easy to install and maintain. You could find a lot of different brands available on the market, as well as designs, styles, and colors. Light-colored ceramic sinks are recommended. It is easier to keep clean and will always be easier to combine with the rest of the decoration.

Toilet seat and bidet

The toilet seems to be something simple and known to all. Still, we must take into account whether the toilet seat and the bidet, if installed, work with a flushometer or by means of gravity. It would be best if you thought about the system with which your hydraulic installation will work so that when you buy the furniture, they are the right ones for your installation.

The minimum space required for the correct use of a toilet or bidet is 0.60 meters wide by 1.20 meters long. In this way, the user can easily access the furniture.

Like sinks, there are many types of toilet seats, and there is a wide variety of brands and colors. In the case of toilets, they are made of ceramic but also stainless steel. In this case, the choice of the toilet seat depends on the taste of each person.

Showers and tubs

The space for the shower inside a bathroom is essential to be kept to a minimum. Of course, it can be larger, but it could be inefficient. The minimum dimensions of a shower or a shower are 0.90 meters by 0.90 meters. In this space, it is possible to perform the action of bathing correctly.

In some toilets, interior benches are placed inside the shower for the use of older people; in these cases, it is appropriate to make a longer side. It would be advisable to stay up to 1.80 meters long by 0.90 meters wide.

There are some prefabricated built-in tubs; in this case, we must first know the type of shower that we prefer to place in our bathroom. We must prepare our facilities to position it correctly.

A tub is an optional piece of furniture to place in any home, and its measurements can be highly variable, which in the case of Colorado Bathroom Remodeling can be a major issue. Tubs can be placed to sit or lie down so that dimensions may vary. Here we share some examples of different tubs depending on their use.

Cabinets, medicine cabinets, and scales

When space permits, the placement of some cabinets can be designed to store cleaning supplies or other types of products in some toilets. You can even place a closet to place a sink and store buckets and brooms. This space can be very comfortable in the bathrooms that are located on a second or third level. With a closet upstairs or in the roof garden, we make it easy to clean these areas.

You can also place a medicine cabinet inside the toilet, and you can even leave a space for a scale for daily use.

Floor levels inside the toilet

Why should we take into account the floor levels of the toilets? The bathroom is a humid space in which water is used in most of its furniture. We must consider that if there is a failure in the operation of any of the furniture and the water spills, this small unevenness will help prevent the water from passing to the rest of the house.

Take into account within the bathroom design of your home that the toilets’ final level must be at least 1 inch below the general level of the rest of the rooms. Likewise, the shower or shower area, that is, the area intended for bathing, must be at least 1 inch below the level of the rest of the finished bathroom floor. In this way, the shower water is contained within this unevenness and runs down the drain.

It is advisable to place a strainer inside the toilet space to be able to have a drain of any leakage or humidity.

Bathroom ventilation system

All toilets must be naturally ventilated. It is recommended that the ventilation be at least 15% of the total area of the bathroom. That is to say, for a bathroom of 4 square meters, ventilation of 0.60 square meters is recommended.

Well-designed bathrooms can be comfortable spaces for any family. Find our bathroom decoration entry for the home.

Four factors to take into account for the distribution of the bathroom

When designing a bathroom, each element and the dimensions of the space must be taken into account to make the most of the physical space, locate all the furniture, and prevent it from becoming a place full of discomfort.

To do this, when designing the bathroom, four specific factors can be taken into account that will allow all the elements to be properly distributed so that it is a comfortable and, of course, spacious place.

1) Aligning the bathroom furniture

We already mentioned the main furniture that you should incorporate into the bathroom design, which are the toilet seat, the sink, and, of course, the shower. However, these should not be located randomly within the space but should be installed in the right place so that this room is practical and functional.

By aligning the pieces, for example, placing the sink and toilet seat next to each other, free space is maximized, allowing free movement within the bathroom. Also, this allows the room to look much more unified. Likewise, the shower can be placed at the back since it gives greater access to the rest of the furniture that will be used more frequently on a daily basis.

2) Larger furniture goes to the back

Following the previous line, you must place the furniture in the appropriate areas for the bathroom distribution to be successful. If you close your eyes and imagine a bathroom, you will never think that the bathtub is in front of the door, the toilet in the back and the sink in a corner.

Not only would this make it look strange, but it would be very inconvenient to access these facilities. The largest pieces of the bathroom should go to the bottom of it so that access is easy and this room is fully functional.

Besides, by placing the largest pieces at the back, the bathroom space will be visually wider and more spacious, allowing it to be easy to get in and out of it. This optimization of the room’s available area is a fundamental aspect to consider throughout the bathroom design process.

3) Integrate the bathroom into the design of the house

When designing a bathroom, it is essential to consider the overall style of the home design. This will allow there to be a continuity between all the spaces. Not only will it be visually pleasing, but it will also make this place feel more familiar.

Likewise, within the same bathroom, it is important that all the elements are similar in design, color, and style, as this will contribute to a much greater visual order. For example, the same type of flooring can be used in the bathroom and inside the shower, which will make everything look more integrated.

4) Visual resources

Suppose the bathroom space is small or somewhat limited (which is very common). In that case, it is advisable to take advantage of every possible visual resource to be able to give it greater amplitude at a visual level, as this will help make the space pleasant and comfortable.

For example, something that can be very useful when separating the shower area from the rest of the bathroom is the see-through bathroom doors or transparent glass partitions. Unlike those glasses that are frosted or shower curtains, transparent glass allows you to perceive the complete dimensions of the bathroom, reducing the feeling of fatigue or overwhelm at sight.

Although the shower is not a space that will be used as frequently as the sink or the toilet, these types of doors help reduce the limited perception of space.

In the end, applying these four factors can go a long way toward optimizing the distribution of elements within the bathroom design. It is important to adapt these tips to the resources and physical space that you really have in order to get the best possible out of it.

Bathroom design is not to be taken lightly

Now that we know the importance of the designs of the bathrooms in our house, we know the importance of considering the furniture that we are going to place and the areas that each piece of furniture occupies. Together with the unevenness it must have and the minimum ventilation it must have, these data will help us make our bathrooms truly comfortable and functional.

In any case, it is always possible to hire a professional team when renovating or designing a new bathroom for a home, restaurant, business, or others. This way, you can rest assured that only the best materials will be used, and every inch of the space that will go into this room will be used.

Proudly powered by WordPress